Buttweld Fitting

LONG RADIUS ELBOWS, SHORT RADIUS ELBOW, CARBON STEEL ELBOWS, STAINLESS STEEL ELBOW MANUFACTURER

A234 WPB, A420 WPL6, A234 WP11, A234 WP5, A403 WP304L, A403 WP316L | ASME/ANSI B16.9, ANSI B16.28, MSS-SP-43

LONG/SHORT RADIUS ELBOWS – 90° ELBOW, 45° ELBOW, 180° ELBOW, 1D, 2D, 3D, 4D, 5D, 10D, CUSTOM RADIUS ELBOWS

Carbon Steel Elbows, Stainless Steel Elbows, Alloy Steel Elbows, Long Radius Elbows, Short Radius Elbows, 3D Elbows, 5D Elbows, Custom Radius Elbow Supplier in India, 316 Elbow, A234 WPB Elbows Manufacturer, A420 WPL6 Elbow, A234 WP11 Elbow, A234 WP5 Elbow, A403 WP304 Elbow, A403 WP304L Elbow, A403-WP316 Elbow, A403-WP316L Elbow, Seamless Elbows, Large Diameter Fabricated Elbows, 20" NB Elbow, 36" NB Elbow Supplier, Buttweld Elbows Manufacturer, Duplex 2205 Pipe Elbow, 100% X-Ray Welded Elbows

An ISO 9001:2008 Certified Company, Industries is a leading manufacturer and supplier of short radius and long radius elbows. We offer our materials with complete certifications and as per international standards. Our production range includes stainless steel elbows, carbon steel elbows, alloy steel elbows, and elbows in special alloys such as Monel, Inconel, Hastelloy. We can manufacture elbows up to 48" with wall thickness ranging from 1.5 mm thickness up to 40mm for varied sizes.

An elbow is a pipe fitting which is used as a connection point between two lengths of pipes to produce a change in the direction of flow in the pipe, usually at an angle of 90°, 45° or 180°. Elbows are also commonly referred to as bends, and are available in a range of materials such as stainless steel, carbon steel, alloy steel, nickel alloys, duplex, and cupro nickel.

Also known as 90° bends, 90° elbows are manufactured as SR (Short Radius) elbows and LR (Long Radius) elbows. 45° elbows are typically made as LR (Long Radius) elbows.

The long radius elbows have a center to end distance that is 1.5 times the NPS in inches (R=1.5D), while the short radius is equal to the NPS in inches (R=1.0D). Short radius elbows are generally used in tight areas, and long radius elbows are used when space is available and flow is more critical. We can also manufacture and supply carbon steel elbows and stainless steel elbows in non-standard size angles such as 60°, 100°, 120° or 150°.

The ends may be machined for butt welding, threaded (usually female), or socketed, etc. When the two ends differ in size, the fitting is called a reducing elbow or reducer elbow.

We are a high quality manufacturer and supplier of long radius elbows, short radius elbows, stainless steel elbows, duplex elbows, and carbon steel elbows as well as fabricated stainless steel elbows. We supply our products to customers in various industries including pharmaceutical, chemical, power, petrochemical, engineering and various other industries.

Buttwelded Pipe Elbow Production Range

Outside Diameter: Seamless Elbow (1/2"～24"), ERW / Welded / Fabricated Elbow (1/2"～48")

Wall Thickness: 3mm – 40mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH120, SCH140, SCH160, XXS

Bending Radius: R=1D – 10D, 15D, 20D

Product’s Angle: 5° – 180° Elbows, 90° and 45° Long Radius Elbows, 180° Long Radius Returns, Short Radius Elbows and Returns

Value Added Services: Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering

Production Grades: Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low Temperature Steel, Carbon Steel, Cupro Nickel

Manufacturing Standards

ASME: ANSI B16.9, ANSI B16.28, MSS-SP-43
DIN: DIN2605, DIN2615, DIN2616, DIN2617, DIN28011
EN: EN10253-1, EN10253-2

ASTM A403 – ASME SA403 – Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

ASME B16.9 – Factory-Made Wrought Fittings Buttwelding

ASME B16.25 – Buttwelding Ends

ASME B16.28 – Wrought Steel Short Radius Elbows and Buttwelding Returns

MSS SP-43 – Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications

Pipe Elbow Material Grades

Elbow Material Specifications
Material Type	Specifications
Stainless Steel Elbow	ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
Carbon Steel Elbow	ASTM A234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPHY 60, WPHY 65, WPHY 70
Low Temperature Carbon Steel Elbow	ASTM A420 WPL3, A420 WPL6
Alloy Steel Elbow	ASTM/ASME A/SA 234 Gr. WP1, WP5, WP9, WP11, WP12, WP22, WP91
Duplex Steel Elbow	ASTM A815, ASME SA815 UNS NO S31803, S32205, Werkstoff No. 1.4462
Nickel Alloy Elbow	ASTM/ASME SB 336 UNS 2200 (Nickel 200), UNS 2201 (Nickel 201) UNS 4400 (Monel 400), UNS 8020 (Alloy 20 / 20 CB 3) UNS 8825 (Inconel 825), UNS 6600 (Inconel 600), UNS 6601 (Inconel 601) UNS 6625 (Inconel 625), UNS 10276 (Hastelloy C276)

PIPE TEE – EQUAL TEE | REDUCING TEE

ASME/ANSI B16.9, ANSI B16.28, MSS-SP-43

CARBON, ALLOY, STAINLESS STEEL EQUAL / REDUCER TEE

Also known as 3 way pipe fittings, tee fittings resemble the alphabet ‘T’, where two horizontal pipes and one vertical pipe can be attached to manage the direction and mixture of fluids. Pipe tees are widely used in piping systems to transport two-phase fluid mixtures and are mainly of two types – Equal Tee and Unequal Tee (Reducing Tee).

When the size of the branch is same as header pipes, equal tee is used, and when the branch size is less than that of header size, reduced tee is used. The three sizes of a tee are End x End x Center. So if you want a tee that is 1’’ on both ends and 3/4’’ in the center, it would be 1’’ x 1’’ x 3/4’’.

Stainless steel tees, carbon steel tees and special grade tees are widely supplied by us to many industries such as power generation, petrochemical, shipbuilding, paper manufacturing, chemical, pharmaceutical, and fabrication.

Depending on our customer requirements, we can manufacture and offer straight tees and reducing tees in various grades including 202, 304/304L, 904L, 316/316L, Duplex 2205, Alloy 20, Cupro Nickel, Monel Alloy 400, Inconel Alloy 625, Inconel Alloy 600, Hastelloy Alloy C276, and also in various Aluminium Grades.

Buttweld Pipe Tee Production Range – Equal Tee, Unequal Tee (Reducing Tee)

Outside Diameter: Seamless Pipe Tee (1/2″～24″), ERW / Welded / Fabricated Pipe Tee (1/2″～48″)

Types: Equal Tees, Reducing Tees

Wall Thickness: 3mm – 40mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH120, SCH140, SCH160, XXS

Value Added Services: Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering

Production Grades: Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low Temperature Steel, Carbon Steel, Cupro Nickel

Manufacturing Standards – Pipe Tee

ASME: ANSI B16.9, ANSI B16.28, MSS-SP-43
DIN: DIN2605, DIN2615, DIN2616, DIN2617, DIN28011
EN: EN10253-1, EN10253-2

ASTM A403 – ASME SA403 – Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

ASME B16.9 – Factory-Made Wrought Fittings Buttwelding

ASME B16.25 – Buttwelding Ends

ASME B16.28 – Wrought Steel Short Radius Elbows and Buttwelding Returns

MSS SP-43 – Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications

Pipe Tee Material Grades

Stainless Steel Tee: ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L

Carbon Steel Tee: ASTM A234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPHY 60, WPHY 65, WPHY 70

Low Temperature Carbon Steel Tee: ASTM A420 WPL3, A420 WPL6

Alloy Steel Tee: ASTM / ASME A/SA 234 Gr. WP1, WP5, WP9, WP11, WP12, WP22, WP91

Duplex Steel Tee: ASTM A815, ASME SA815 UNS NO S31803, S32205, Werkstoff No. 1.4462

Nickel Alloy Tee: ASTM / ASME SB 336 UNS 2200 (Nickel 200), UNS 2201 (Nickel 201), UNS 4400 (Monel 400), UNS 8020 (Alloy 20 / 20 CB 3), UNS 8825 (Inconel 825), UNS 6600 (Inconel 600), UNS 6601 (Inconel 601), UNS 6625 (Inconel 625), UNS 10276 (Hastelloy C276)

PIPE CROSS – STRAIGHT/EQUAL CROSS, REDUCING CROSS

ASME/ANSI B16.9, ANSI B16.28, MSS-SP-43

CARBON, ALLOY, STAINLESS STEEL PIPE CROSS

Cross tee usually generates high stress on pipe as temperature changes, because they are at the center of four connection points. In comparison, a tee is steadier than a cross, as a tee behaves like a three-legged stool, while a cross behaves like a four-legged stool.

We can supply pipe cross in two types namely, straight cross and reducing cross in a complete range of shapes and dimensions. We are a leading supplier of stainless steel cross tee and alloy steel cross tee to domestic customers and international customers in various industries such as oil and gas, petrochemical, power generation, pharmaceuticals, paper manufacturing, natural gas industry and chemical plants. Cross is used in many applications, as a junction for intersecting pipes.

Butt Welded Pipe Cross Production Range

Outside Diameter: Seamless Cross Fitting (1/2″～24″), ERW / Welded / Fabricated Cross Fitting (1/2″～48″)

Type: Seamless, Welded, Equal Cross, Reducing Cross

Wall Thickness: 3mm – 40mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH120, SCH140, SCH160, XXS

Value Added Services: Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering

Production Grades: Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low Temperature Steel, Carbon Steel, Cupro Nickel

Manufacturing Standards

ASME: ANSI B16.9, ANSI B16.28, MSS-SP-43
DIN: DIN2605, DIN2615, DIN2616, DIN2617, DIN28011
EN: EN10253-1, EN10253-2

ASTM A403 – ASME SA403 – Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

ASME B16.9 – Factory-Made Wrought Fittings Buttwelding

ASME B16.25 – Buttwelding Ends

ASME B16.28 – Wrought Steel Short Radius Elbows and Buttwelding Returns

MSS SP-43 – Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications

Pipe Cross Material Grades

Stainless Steel Pipe Cross: ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L

Carbon Steel Pipe Cross: ASTM A234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPHY 60, WPHY 65, WPHY 70

Low Temperature Carbon Steel Pipe Cross: ASTM A420 WPL3, A420 WPL6

Alloy Steel Pipe Cross: ASTM / ASME A/SA 234 Gr. WP1, WP5, WP9, WP11, WP12, WP22, WP91

Duplex Pipe Cross: ASTM A815, ASME SA815 UNS NO S31803, S32205, Werkstoff No. 1.4462

Nickel Alloy Pipe Cross: ASTM / ASME SB 336 UNS 2200 (Nickel 200), UNS 2201 (Nickel 201), UNS 4400 (Monel 400), UNS 8020 (Alloy 20 / 20 CB 3), UNS 8825 (Inconel 825), UNS 6600 (Inconel 600), UNS 6601 (Inconel 601), UNS 6625 (Inconel 625), UNS 10276 (Hastelloy C276)

PIPE REDUCER – ECCENTRIC REDUCER | CONCENTRIC REDUCER

ASME/ANSI B16.9, ANSI B16.28, MSS-SP-43

CARBON, ALLOY, STAINLESS STEEL, COPPER REDUCER

Our products are manufactured as per ASTM, ASME, DIN, other international standards and as per custom requirements of our customers.

Our regular production and stock items include stainless steel reducers, carbon steel reducers, alloy steel reducers, and duplex steel reducers. A steel pipe reducer is one of the most commonly used industrial pipe fittings, which helps connect two pipes or tubes of different diameters. These are mainly used to adapt different pipe sizes in a pipeline system. Pipe reducers are mainly categorized into two types – concentric reducer and eccentric reducer.

Our products have won approvals from major end-users in India and overseas, including oil and gas, power station, petrochemical, and shipbuilding industries.

Buttweld Pipe Reducer Production Range – Concentric & Eccentric

Outside Diameter: Seamless Pipe Reducer (1/2″–24″), ERW / Welded / Fabricated Pipe Reducer (1/2″–48″)

Type: Concentric Reducers, Eccentric Reducers

Wall Thickness: 3mm – 40mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH120, SCH140, SCH160, XXS

Value Added Services: Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering

Production Grades: Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low Temperature Steel, Carbon Steel, Cupro Nickel, Copper

Manufacturing Standards

ASME: ANSI B16.9, ANSI B16.28, MSS-SP-43
DIN: DIN2605, DIN2615, DIN2616, DIN2617, DIN28011
EN: EN10253-1, EN10253-2

ASTM A403 – ASME SA403: Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

ASME B16.9: Factory-Made Wrought Fittings Buttwelding

ASME B16.25: Buttwelding Ends

ASME B16.28: Wrought Steel Short Radius Elbows and Buttwelding Returns

MSS SP-43: Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications

Pipe Reducer Material Grades

Stainless Steel Reducer: ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L

Carbon Steel Reducer: ASTM A234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPHY 60, WPHY 65, WPHY 70

Low Temperature Carbon Steel Reducer: ASTM A420 WPL3, A420 WPL6

Alloy Steel Reducer: ASTM / ASME A/SA 234 Gr. WP1, WP5, WP9, WP11, WP12, WP22, WP91

Duplex Steel Reducer: ASTM A815, ASME SA815 UNS NO S31803, S32205 – Werkstoff No. 1.4462

Nickel Alloy Reducer: ASTM / ASME SB 336 UNS 2200 (Nickel 200), UNS 2201 (Nickel 201), UNS 4400 (Monel 400), UNS 8020 (Alloy 20 / 20 CB 3), UNS 8825 (Inconel 825), UNS 6600 (Inconel 600), UNS 6601 (Inconel 601), UNS 6625 (Inconel 625), UNS 10276 (Hastelloy C276)

PIPE END CAPS – ROUND, OVAL

ASME/ANSI B16.9, ANSI B16.28, MSS-SP-43

CARBON, ALLOY, STAINLESS STEEL PIPE CAPS

Steel Pipe Caps are pipe fittings mainly used as plugs to cover the ends of pipes. We manufacture and supply pipe end caps in standard sizes, as well as customized specifications based on customer requirements.

Grades of pipe caps we manufacture include 304/304L, 316/316L, 321, 347, 317L, 310S, 904L, Duplex, Alloy 201, Alloy 800H, Alloy C276, Cupro Nickel, Alloy 400, Alloy 625, and Alloy 600. Our inventory includes stainless steel and carbon steel pipe caps in standard sizes and grades. We also offer pipe caps in various shapes – round, square, rectangular, and custom shapes.

Pipe End Cap Production Range

Outside Diameter: 1/2″ – 48″

Wall Thickness: 2–40 mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH120, SCH140, SCH160, XXS

Value Added Services: Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering

Production Grades: Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low Temperature Steel, Carbon Steel, Cupro Nickel

Manufacturing Standards

ASME: ANSI B16.9, ANSI B16.28, MSS-SP-43
DIN: DIN2605, DIN2615, DIN2616, DIN2617, DIN28011
EN: EN10253-1, EN10253-2

ASTM A403 / ASME SA403: Specification for Wrought Austenitic Stainless Steel Piping Fittings

ASME B16.9: Factory-Made Wrought Buttwelding Fittings

ASME B16.25: Buttwelding Ends

ASME B16.28: Wrought Steel Short Radius Elbows and Buttwelding Returns

MSS SP-43: Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications

Pipe Cap Material Grades

Stainless Steel Pipe Cap: ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L

Carbon Steel Pipe Cap: ASTM A234 WPB, WPBW, WPHY 42, 46, 52, 60, 65, 70

Low Temperature Carbon Steel Pipe Cap: ASTM A420 WPL3, WPL6

Alloy Steel Pipe Cap: ASTM/ASME A/SA 234 Gr. WP1, WP5, WP9, WP11, WP12, WP22, WP91

Duplex Steel Pipe Cap: ASTM A815 / ASME SA815 UNS NO S31803, S32205 (Werkstoff No. 1.4462)

Nickel Alloy Pipe Cap: ASTM/ASME SB 336 UNS 2200 (Nickel 200), 2201 (Nickel 201), 4400 (Monel 400), 8020 (Alloy 20 / 20 CB 3), 8825 (Inconel 825), 6600 (Inconel 600), 6601 (Inconel 601), 6625 (Inconel 625), 10276 (Hastelloy C276)

PIPE BENDS, PIGGABLE BENDS, U-BENDS, RETURN BENDS, MITER BENDS

ASME/ANSI B16.9, ANSI B16.28, MSS-SP-43

CARBON, ALLOY, STAINLESS STEEL BENDS – 3D, 4D, 5D, 6D, 8D, 10D

Steel pipe bends can be manufactured from a wide range of materials including low and high yield carbon steels, alloy steels, stainless steels, Cr-Ni alloys, and titanium. We specialize in large and small stainless steel bends and piggable bends in grades such as Duplex, 310S, 304L, 316L, 317L, 347, 321, and 904L.

Both seamless and welded pipes can be used to manufacture stainless steel and carbon steel bends, depending on technical feasibility.

Increasingly, customers in the petrochemical industry are choosing stainless steel, carbon steel, and nickel alloy bends for modern piping systems. High-quality pipe bends reduce the need for welding and fittings, and enhance fluid flow within systems.

Our pipe bends are widely used across industries like petroleum, power generation, natural gas, chemical processing, shipbuilding, and more.

Steel Pipe Bends / Piggable Bends Production Range

Outside Diameter: Seamless Pipe Bends (1/2″ – 24″), ERW / Welded / Fabricated Pipe Bends (2″ – 36″)

Wall Thickness: 3mm – 40mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS

Bending Radius: R = 1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom

Product Angle: 0° – 180°

Production Grades: Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low Temperature Steel, Carbon Steel, Cupro Nickel

Value Added Services: Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering

Manufacturing Standards

ASME: ANSI B16.9, ANSI B16.28, MSS-SP-43
DIN: DIN2605, DIN2615, DIN2616, DIN2617, DIN28011
EN: EN10253-1, EN10253-2

ASTM A403 / ASME SA403: Specification for Wrought Austenitic Stainless Steel Piping Fittings

ASME B16.9: Factory-Made Wrought Buttwelding Fittings

ASME B16.25: Buttwelding Ends

ASME B16.28: Wrought Steel Short Radius Elbows and Buttwelding Returns

MSS SP-43: Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications

Pipe Bends Material Grades

Stainless Steel Bends: ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L

Carbon Steel Bends: ASTM A234 WPB, WPBW, WPHY 42, 46, 52, 60, 65, 70

Low Temperature Carbon Steel Bends: ASTM A420 WPL3, WPL6

Alloy Steel Bends: ASTM / ASME A/SA 234 Gr. WP1, WP5, WP9, WP11, WP12, WP22, WP91

Duplex Steel Bends: ASTM A815 / ASME SA815 UNS NO S31803, S32205 (Werkstoff No. 1.4462)

Nickel Alloy Bends: ASTM / ASME SB 336 UNS 2200 (Nickel 200), 2201 (Nickel 201), 4400 (Monel 400), 8020 (Alloy 20 / 20 CB 3), 8825 (Inconel 825), 6600 (Inconel 600), 6601 (Inconel 601), 6625 (Inconel 625), 10276 (Hastelloy C276)

STUB END | LAP JOINT

ASME/ANSI B16.9, ANSI B16.28, MSS-SP-43

CARBON, ALLOY, STAINLESS STEEL LONG/SHORT PATTERN STUB ENDS / LAP JOINTS

Stub ends can be supplied in standard and non-standard ANSI dimensions. Special-length stub ends or lap joints can also be provided on demand.

Stub ends are pipe fittings used instead of welded flanges, typically in conjunction with rotating back-up flanges. They are commonly used with Lap Joint Flanges.

We manufacture and supply stub ends in various grades including 304/304L, 304H, 316/316L, 321, 347, Duplex steel, 904L, Alloy 20, 317L, and 310S. Our products are widely used in industries such as power generation, oil and gas, petrochemical, chemical processing, fabrication, wastewater treatment, and pharmaceuticals.

Stub End / Lap Joint Production Range

Outside Diameter: 1/2″ – 24″

Type: Long/Short Lap Joint Stub Ends

Wall Thickness: 2mm – 100mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH120, SCH140, SCH160, XXS

Production Grades: Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low Temperature Steel, Carbon Steel, Cupro Nickel

Value Added Services: Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering

Manufacturing Standards

ASME: ANSI B16.9, ANSI B16.28, MSS-SP-43
DIN: DIN2605, DIN2615, DIN2616, DIN2617, DIN28011
EN: EN10253-1, EN10253-2

ASTM A403 / ASME SA403: Wrought Austenitic Stainless Steel Piping Fittings

ASME B16.9: Factory-Made Wrought Buttwelding Fittings

ASME B16.25: Buttwelding Ends

ASME B16.28: Wrought Steel Short Radius Elbows and Buttwelding Returns

MSS SP-43: Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications

Stub Ends Material Grades

Stainless Steel Stub End: ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L

Carbon Steel Stub End: ASTM A234 WPB, WPBW, WPHY 42, 46, 52, 60, 65, 70

Low Temperature Carbon Steel Stub End: ASTM A420 WPL3, WPL6

Alloy Steel Stub End: ASTM / ASME A/SA 234 Gr. WP1, WP5, WP9, WP11, WP12, WP22, WP91

Duplex Steel Stub End: ASTM A815 / ASME SA815 UNS NO S31803, S32205 (Werkstoff No. 1.4462)

Nickel Alloy Stub End: ASTM / ASME SB336 UNS 2200 (Nickel 200), 2201 (Nickel 201), 4400 (Monel 400), 8020 (Alloy 20 / 20 CB 3), 8825 (Inconel 825), 6600 (Inconel 600), 6601 (Inconel 601), 6625 (Inconel 625), 10276 (Hastelloy C276)

CARBON, ALLOY, STAINLESS STEEL FORGED THREADED PIPE FITTINGS

MANUFACTURER/EXPORTER OF HIGH-QUALITY THREADED FITTINGS – ASME B16.11

THREADED ELBOW, TEE, CROSS, UNION, COUPLING & MORE

Forged threaded pipe fittings are available ex-stock in all major stainless steel grades (ASTM A182 F316L, F304L) and ASTM A105. We are continually expanding our product range to better serve our customers. Threaded fittings offer effective sealing for pipes transporting liquids, gases, steam, and hydraulic fluids.

We offer a variety of forged threaded fittings, including threaded elbows, tees, crosses, bends, couplings, caps, unions, hexagon bushings, square plugs, and hex plugs. Custom fittings are also available in stainless steel and special alloy grades as per client specifications.

High Pressure Threaded Pipe Fittings

Pressure Class	2000LBS, 3000LBS, 6000LBS
Products	Elbow 90°, Elbow 45°, Tee, Cross, Union, Street Elbow, Coupling, Half Coupling, Reducing Coupling, Cap, Hex Head Bushing, Hex Head Plug, Square Head Plug, Round Head Plug, Bull Plug, Boss, Outlet, Hex Nipple, Swage Nipple
Dimension Specifications	ASME B16.11, MSS SP-79, 83, 95, 97, BS 3799
Size	1/8″ to 4″ (DN6 to DN100)

Forged Pipe Fittings Manufacturing Standards

ASTM A182 / ASME SA182: Wrought Austenitic Stainless Steel Piping Fittings
ASME B16.9: Factory-Made Wrought Buttwelding Fittings
ASME B16.11: Forged Fittings, Socket-Welding and Threaded
MSS SP-43: Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications
MSS SP-95: Swaged Nipples and Bull Plugs
BS 3799: Steel Pipe Fittings, Screwed and Socket-Welding for the Petroleum Industry

Forged Threaded Stainless Steel Fittings

Grades: ASTM A182 F304, F304L, F306, F316L, F304H, F309S, F309H, F310S, F310H, F316TI, F316H, F316LN, F317, F317L, F321, F321H, F11, F22, F91, F347, F347H, F904L, ASTM A312/A403 TP304, TP304L, TP316, TP316L

• Material conforms to ASME A182
• Dimensions conform to ASME B16.11
• NPT threads conform to ASME B1.20.1

Forged Threaded Carbon Steel Fittings

Grades: ASTM A105, A350 LF2, A106 Gr.B, A234 WPB

• Material conforms to ASTM/ASME A105/SA105
• Dimensions conform to ASME B16.11
• NPT threads conform to ASME B1.20.1

SWAGE NIPPLES, CONCENTRIC SWAGE, ECCENTRIC SWAGE, NPT/BSPT THREADED SWAGE NIPPLES MANUFACTURER

MSS-SP-95 STANDARD, ASME B16.11, BS 3799, ASTM A105, A350-LF2, A106, A312, A234, A403, A182 (F304/304L, F316/316L)

HIGH QUALITY STAINLESS STEEL SWAGE NIPPLES, CARBON STEEL/ALLOY STEEL SWAGE NIPPLES

Concentric Swage, Eccentric Swage, NPT Threaded Swage Nipples, BSPT Threaded Swage Nipples, Line Pipe Swages, Swage Nipple Suppliers, Threaded Swage Nipples, Swage Nipple Exporters, Concentric Swage Nipple, Eccentric Swage Nipples, Swaged Nipple Suppliers, Stainless Steel Socket Weld Swage Nipple, A105N Swage Nipples, A182 Swage Nipples, Stainless Steel 304 Swage Nipples, Stainless Steel 316 Swage Nipples, Inconel Swage Nipples, Monel Swage Nipples, Hastelloy Swage Nipples, Swage Nipples with Threaded Ends, Swage Nipples with Plain Ends, Swage Nipples with Bevel Ends, Hot Dip Galvanized Swages

Swage Nipples are manufactured in accordance with MSS-SP-95 (Design Specification), ASME BS 3799, ASTM A105, A350-LF2, A106, A312, A234, A403, ASTM A182 (F304, F304L, F316, F316L). Swages or Swage Nipples are a type of pipe connection fitting used to go from one size tubing or casing to another. Some of the common grade swage nipples we manufacture include A234-WPB, A403-WP316, A403-WP304, and A420-WPL6 in size range of 1/4″ through to 8″ for concentric swage nipples and 1/4″ to 4” for eccentric swage nipples. We can offer Swage Nipples with plain, beveled or threaded ends. Thickness and outside diameters of swage nipples shall correspond to those of the appropriate nominal pipe size. Swage nipples are offered in threaded ends per ASME B1.20.1 and beveled ends per ASME B16.25.

All swage nipples manufactured are either made from seamless pipe or bar material and have suitable working pressure equivalent to straight seamless pipes. We use high quality raw materials (steel pipes, bar stock) for manufacturing stainless steel swage nipples and carbon steel swage nipples. The raw materials we use are fully traceable to the mill source through our MTR reports. Our products are manufactured as per customer specifications and in accordance with international standards including American Standard (ASTM/ANSI), British Standard (BS), and DIN/European standard. NPT threads on Swage Nipples conform to ANSI/ASME B1.20.1.

Swage Nipples MSS-SP-95 Design Specification – Dimensional Standard for Stainless Steel, Carbon Steel, Alloy Steel Swage Nipples

Swage Nipples BS3799 Design Specification – Dimensional Standard for Stainless Steel, Carbon Steel, Alloy Steel Swage Nipples

We can offer electro-galvanized coating, blackodising finish, sand blasting, or pickled finish in case of stainless steel swage nipples. Our swage nipple products are supplied with EN 10204 3.1 Test Certification, with complete details on the chemical and physical properties of the materials. They are permanently marked with size, schedule, grade, and heat code.

All our products are manufactured with high quality raw materials and supplied to our customers with complete guarantee and certifications.

Swage Nipples Production Range, Specifications – Stainless Steel, Carbon Steel, Alloy Steel Swage Nipples

Size: 1/8” to 8”, DN8 to DN200

Type: Concentric Swage Nipples, Eccentric Swage Nipples

Dimensions: MSS SP-95-2006, BS 3799

Raw Materials: A106 Gr. B Seamless Pipes, A105/A105N Bars, A182 304/304L Bars, A182 316/316L Bars, A312 304/304L Seamless Pipes, Duplex Seamless Pipes, A312 316/316L Seamless Pipes, A350-LF2, Alloy Steel Seamless Pipes/Bars

Material Specifications: ASTM A105, A350 LF2, ASTM A182 (F304,F304L,F316,F316L,F304H,F316H,F317L,F321,F11,F22,F91)

Connection Ends:

1. PBE: Plain both ends, BBE: Bevel both ends, TBE: Thread both ends
2. PSE: Plain small end, BSE: Bevel small end, TSE: Thread small end
3. PLE: Plain large end, BLE: Bevel large end, TLE: Thread large end

Thickness: Standard, Extra Heavy, Schedule 160, or Double Extra Heavy

Ends: Beveled, Square Cut (for socket-weld), NPT/BSPT/BSP Threaded Swages, Customer Specification

Test Certificates: EN 10204 3.1, Raw Material Certificates Available, Destructive & Non Destructive Testing (NDT) Reports from NABL Approved Labs

Material Finish: Electro-Galvanized Coating, Black Finish, Blackodising Finish, Sand Blasting, or Pickled Finish in case of Stainless Steel Swage Nipples