Aadinath Stainless LLP stocks a full scope of round bar from 1/16″ round through 26″ in measurement. Almost all evaluations of steel are supplied in round bar.
| Bar Standard | ASTM A276, ASTM A479, AMS 5513, AMS 5511, AMS 5647 |
|---|---|
| Bar Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Round bar size | Diameter: 3-~800mm |
| Hex Bar size | 2-100mm A/F |
| Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Square bar size | 4 to 100mm |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Rectangular Bars Section | 3.0 to 12.0mm thickness |
| Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| ASTM A276 Type Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Threaded Bar Billet Size | 1/2 to 495mm Diameter |
| Rectangular Size | 33 x 30mm to 295 x 1066mm |
| Hex Bars Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| ASTM A276 Type Hollow Bar Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| SUS T-Bar Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Rolled Stainless Steel Flat Bars Condition | Hardened & tempered, annealed |
| ASTM A276 Type Cold Rolled Bar Technique | Stainless Steel Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Rod Processing | Bar cutting to 650mm |
| Rounds Bar Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Our Stainless Steel Round bar conforms to NACE MR0175/ISO 15156 | |
| Single Piece Length | 3 meter, 6 meter, 36 meter, 18 meter |
|---|---|
| Thickness/Diameter | 3-4 inch, 1-2 inch, 2-3 inch, 0-1 inch, >4 inch |
| Certification | BV, ISO, ROHS, IBR |
| Shape | Square, Round, Hexagonal |
| Range | 1mm to 350mm dia |
We Aadinath Stainless LLP, offer Special Grade Flats which are basically thin strips of mild steel with the thickness of the strip varying commonly from 8mm to 100mm though thicker flats are also available. MS Flat bars may be considered the most basic of steel structures. Its applications range from construction to machine fabrication. These flats are rolled in low temperature which imparts higher strength to the structures.
| Shape | Flat Bar |
|---|---|
| Size | 100 x 25 mm |
| Single Piece Length | 18 meter |
| Usage | Manufacturing, Construction |
| Weight | 0.1 -2.4 Kg/mtr |
We are one of the conspicuous names in the industry for the inclusive range of Square Bar for our valuable customers. We are offering these square bars at leading market rates. Apart from this, these square bars are available in varied sizes to suit the requirements of our customers.
| Shape | Square |
|---|---|
| Thickness/Diameter | 2-110 mm |
| Tensile Strength | 410 Mpa |
| Is It Rust Proof | Rust Proof |
